What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 13:30
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Edit 2024–10.
One
Intel Stock (NASDAQ:INTC) Blasts Up as Mac Support Dies - TipRanks
but this device (an Inductor) … impedes the rapid changes in the current.
In schematic diagrams this is the symbol for a fuse:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
WWE King & Queen Of The Ring 2025 Finals Confirmed - WrestleTalk
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What are some funny and smart quotes?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
What is lightning?
He then asserts :
Nintendo Switch 2’s faster chip can dramatically improve original Switch games - Ars Technica
He then describes the function of a fuse.
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Shared Genetic Signatures Found Across Psychiatric Disorders - Neuroscience News
This is where this question deviates from being a 'generic' question, and becomes more specific.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
First Sentence:
The third is lightning and “how it gets conducted into a home.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There are three different concepts here that are getting confused.
FAA will restrict flights at Newark airport through end of year - NJ.com
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It seems Mohan does not understand the difference between a comment and an Answer.
eight
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What are some signs he is deeply in love with you?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but I think this circuit , shows a few more pieces.
The bolt then partially travels down the line to your home.
Why do people think Justin Bieber is worse than Joseph Stalin?
It also is a device that limits the change in current flow.
2024–10–16 [ OO OLAOYE OYEBODE ]
[image of Common-mode choke]
Why didn't my ex fight for our relationship? He gave up so easily.
A circuit breaker is similar, but is resettable.
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
At least they know the answer if they wanted it.
Here is a simplified AC power diagram.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These devices are installed between the “hot” and “neutral” and protective ground.
I post the exact comment here.
An AC voltage/ current source, and an ac inductive load.
There are two important concepts here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
the problem then depends on "how fast does the fuse operate?".
At one ohm, the resistor has a maximum of 1 watt power.
what exactly is a ‘surge’ protector?
Upvotes:
This one hit behind the barn.
Barnstars:
This is 'the assistant's answer'
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The other is “what does a “fuse” do?”
This is where the MOV conducts again, and dissipated the energy.
[old diagram got deleted by accident]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So, the voltage could go up to 500 volts, and the fuse will not open up.
For this case there are devices called Metal oxide varistors (MOV).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
a photo is worth a thousand words.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These are simplified answers to the original question, and does not change anything I wrote above.
nine
so, what happens?
Because the load is inductive, the current lags the voltage.(by a bit).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But it can get overloaded, and no longer works.
Now when you have a certain ac resistance, then a current flows in a loop.
One is “what exactly is in a ‘surge protector’ ? ”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What does a fuse do?